TEL:0574-63737789   LAN:CN | EN

NEWS

HOME  > NEWS

The use of flat pulleys.

点击数:249    来源:365bet官网   发布日期:2018-04-28

Flat pulleys are driven by friction, and they can be driven in a non-linear drive. Flat pulleys are often used in low-power drives.

1523437233907031.jpg

Flat pulley solves sliding method

1.If the flat belt drive system must ensure the accuracy of the flat belt pulley when it is working, it is necessary to improve the manufacturing accuracy of the flat pulley gear teeth so that the pitch of the flat pulley can be ensured and the pitch of the flat belt pulley is regular and normal. of.   

2.The flat pulley inside the flat pulley drive system must solve the errors and accumulated errors in the pitch of the flat pulley gear during the manufacturing process.

3.The flat pulley in the flat belt drive system needs proper initial tension to ensure that the flat pulley will not cause mechanical waves because the tension is too high or the tension is too small.

4.Inside the flat pulley drive system, it is necessary to ensure that the surface of the flat pulley wheel body is free of any contamination caused by oil stains during the use of the flat pulley.

5.The flat pulley inside the flat pulley drive system must be installed to ensure that the two flat pulleys are parallel to each other.

6.In the flat belt drive system, the machining accuracy on the flat pulley must be solved to prevent the vibration of the trapezoidal tooth synchronous belt.

7.In this type of power machinery in which the flat pulley is used to drive the flat belt drive system, frequent start-up should be avoided as much as possible to prevent the life of the flat pulley from being shortened.

8.Inside the flat belt drive system, it is necessary to periodically clean the flat pulley surface to ensure that there is no greasy dirt on the flat pulley surface.

9.The flat belt pulley drive system needs to periodically test the tension of the flat pulley. If the flat pulley is slack, it needs to be tensioned immediately.

1523437401869192.jpg

上一篇:How to count the circumference of the synchronous wheel
下一篇:What is the transmission of the timing belt?
XML 地图 | Sitemap 地图